[. . . ] Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. [. . . ] The delay will decrease but in return the picture quality will become poor. – Film Mode*3*5*6 Video: “Film Mode” detection is not applied and the input signal is handled as a video source. The AV receiver will adjust to the picture source, automatically converting it to the appropriate progressive signal and reproducing the natural quality of the original picture. – Edge Enhancement*3*5*6*7 Off Low Mid High With Edge Enhancement, you can make the picture appear sharper. – Noise Reduction*3*5*6*7 Off Low Mid High With this setting, you can reduce noise appearing on the screen. – Brightness*1*3*5 –50 to 0 to +50 With this setting you can adjust the picture brightness. – Contrast*1*3*5 –50 to 0 to +50 With this setting you can adjust contrast. – Hue*1*3*5 –50 to 0 to +50 With this setting you can adjust the red/green balance. – Saturation*1*3*5 –50 to 0 to +50 With this setting you can adjust saturation. Full: Zoom: Wide Zoom: Auto: According to the input signals and monitor output setting, the AV receiver automatically selects the “4 : 3”, “Full”, “Zoom” or “Wide Zoom” mode. See “Monitor Out” for details on the monitor output setting (➔ page 42). When video is output from HDMI OUT, it is processed the same as “Through”. With “Picture Mode”, you can change the following settings to be suitable for the movie or game screen by one operation: “Game Mode”, “Film Mode”, “Edge Enhancement”, “Noise Reduction”, “Brightness”, “Contrast”, “Hue”, “Saturation” or “Color Temperature”. En 51 ■ Color Temperature*3*5 Warm Normal Cool With this setting you can adjust the color temperature. Note • “Picture Adjust” cannot be used with the NET input selector. *1 This procedure can also be performed on the remote controller by using the Home menu (➔ page 39). *2 When a 3D video source is input , “Wide Mode” is fixed to “Full”. *3 When the “Picture Mode” setting is set to anything other than “Custom”, this setting cannot be used. *4 If the “Resolution” setting is set to “4K Upscaling” (➔ page 42), this setting is fixed to “Off”. *6 If you are using the analog RGB input, this setting is not available. *7 If the “Game Mode” setting is set to “On”, this setting is fixed to “Off”. Audio Selector You can set priorities of audio output when there are both digital and analog inputs. [. . . ] € The AV receiver automatically turns on, and selects the input to which the Blu-ray Disc/DVD player/recorder is connected. € The TV automatically turns on, and selects the input to which the AV receiver is connected. Following the operating instructions of the TV, select “Use the TV speakers” from the menu screen of the TV, and confirm that the audio is output from the speakers of the TV, and not from the speakers connected to the AV receiver. Select “Use the speakers connected from the AV receiver” from the menu screen of the TV, and confirm that the audio is output from the speakers connected to the AV receiver, and not from the TV speakers. [. . . ]